DIGI-SYS DAAD-4 is a combined 24 bit AD & DA converter 1U rack-mount which produces an AES/EBU or S/PDIF digital audio output from a balanced XLR or unbalanced BNC input. It simultaneously produces a stereo balanced XLR or unbalanced BNC output from an incoming AES/EBU or S/PDIF digital input signal.
The analogue inputs have left and right front panel fine analog level controls using pre-set potentiometer and additional digital control from -20dBu to +20dBu through interactive controls. The Interactive controls provide superb flexibility in selecting balanced or unbalances signal inputs. Out puts are always available in balanced and unbalanced both formats. The output bit depth can be selected from 16 or 24 bits. The large dynamic range is optimized by micro controller with full scale resolution.
DIGI-SYS DAAD-4 has excellent Digital to Analogue converter. The Sampling Frequency range from 16 to 192 KHz. This unit has excellent signal to noise ratio and provide all coding errors in the incoming Digital signals.
DIGI-SYS DAAD-3 can also be field configured for 24 Bit Dual ADC Function.
DIGI-SYS DAAD-4 has excellent overall frequency response and very low distortion, which has been achieved by selectively mixing integrated circuits and discrete devices. Extremely low noise levels achieved also allow perfect recovery from week digital signals in the range of 100 mV. There is an individual gain control to give ±10db level adjustment.
Unique user interface through a graphical LCD and navigation controls provide unlimited configurations and fine level controls. The LCD display in conjunction with built in error analysis provide all critical parameter display. The unit is housed in a 19” rack mount chassis with power connections as per IEC recommendation.
Adjustable Analog Gain ±10 dB
24 bit capability
Digital Gain control ±20 dB
Selectable Sample Rate up to 96K
Short Circuit Protected
Ultra Low Noise
Excellent Frequency Response
Extremely Low Distortion
Stabilized Power Supply
Digital signal analysis
High signal isolation (transformers)
LCD display
Bar graph display analog levelsInteractive controls
Technical Specifications | |
Digital to Analogue converter | |
Digital input | 1x AES/EBU XLR F 3 pin, 2x S/PDIF BNC |
Digital input sample rate | 16 KHz to 216 KHz auto detect and display |
Input lock accuracy | ±2% of standard sample rates. |
Digital input signal resolution | 16-24 bit |
Digital input amplitude | 200 mV min. (90 mV typical), 5 V PP max. |
Digital input Impedance | 110Ω balanced, 75Ω unbalanced |
Analogue output | 2x XLR M 3 pin (balanced), 2x BNC (unbalanced) |
Max output level | 24dBu active balanced, 18dBu active unbalanced |
Output impedance | <50Ω ( min load 600Ω) |
Frequency Response | ±0.25dB (20Hz to 20KHz) |
Signal to noise ratio | 105 dB ( 0dBFS) |
Total Harmonic Distortion | <0.005 |
Channel matching | ±0.25dB (20Hz to 20KHz) |
Dynamic range | >100dB |
Analogue to Digital converter | |
Analog input | 2x XLR F (balanced), 2x BNC (unbalanced) |
Level reference +4dBu | = (-9dBFS) nominal |
Input level | 0dBu nom. +20dBu max. |
Input impedance | >10kΩ balanced |
Dynamic range | >100dB |
Gain range | ±10 dB analog, ±20 dB digital |
Digital output | 1x AES/EBU XLR M, 1x SPDIF BNC |
Output Impedance | 110W Bal transformer isolated, 75W Unbal active |
Sampling Frequency | 44.1KHz, 48KHz, 88.2KHz and 96KHz |
Sampling Resolution | 16 or 24 Bits |
Frequency Response | ±0.25dB (20Hz to 20KHz) |
Signal to Noise Ratio | 90 dB |
T.H.D. | <0.005 |
Mechanical | |
Power | 230 V ±10%, 50 Hz, 20VAMax |
110 /230 V ±10%, 50/60Hz 20VA Max (optional) | |
Size – HxWxD | 44.5mm x 483mm x 203mm(1.75″X19″X8″) |
Standard 19″ rack mounts. |
Copyright © Digital System Solutions 2018-Developed By DIGI-SYS Privacy Policy